Unite scraper type self-cleaning filter is divided into three series: internal scraper type self-cleaning filter, external scraper type self-cleaning filter and cylinder scraper type self-cleaning filter. Mainly suitable for high viscosity materials, including polymer, coating, adhesive, plastisol, latex coating, resin, ink, lubricant and peanut butter.
The picture shows the cylinder scraper type self-cleaning filter produced by Jiangsu union Filter Equipment Co., Ltd
Q1: what liquid is the scraper type self-cleaning filter of Jiangsu Union?
A: this filter is mainly suitable for water and 80x104pa. S viscous solution.
Q2: what is the main difference between scraper filter and brush filter?
A: in terms of working principle: the scraper type self-cleaning filter is driven by the motor to rotate the scraper and scrape the inner wall of the filter element to clean the sewage; the brush type is driven by the motor to rotate the stainless steel brush in the filter screen to filter;
In the scope of application: the scraper type is suitable for the liquid with high viscosity; the recoil type is suitable for the liquid without viscosity; the equipment between the two is the brush type self-cleaning filter, and the stainless steel brush is used for cleaning the filter element, which is widely used;
In terms of price: the scraper type is higher and the brush type is lower.
Q3: can the scraper filter of Jiangsu younet be continuously filtered online for 24 hours?
A: Yes, the equipment is fully automatic, ending heavy filter element replacement and cleaning.
The picture shows the cylinder scraper type self-cleaning filter produced by Jiangsu union Filter Equipment Co., Ltd
Q4: what kind of scraper is commonly used?
A: the metal sheet scraper / Teflon scraper adopted by Jiangsu union scraper filter.
Q5: is the air cylinder scraper type self-cleaning filter airtight?
A: Jiangsu younet is airtight filtration.
The picture shows the cylinder scraper type self-cleaning filter produced by Jiangsu union Filter Equipment Co., Ltd
Q6: what are the precautions when installing the scraper type self-cleaning filter of Jiangsu Union?
A: 1. The equipment shall be installed in bypass mode to facilitate the maintenance and repair of the equipment without shutdown;
2. The equipment can be installed horizontally or vertically according to the site conditions. The equipment must be connected with the pipeline according to the direction of the water inlet and outlet. When the equipment is installed vertically, the water inlet of the equipment is upward, and when the equipment is installed horizontally, the drain outlet is downward;
3. The water inlet, water outlet and drain outlet of the equipment shall be equipped with valves.
Q7: what kind of blowdown device is better for scraper filter?
A: electric or pneumatic ball valve is recommended.
Website:http://www.unitefilter.cn/
Contact:0510-85956566或400-668-0669
Adress:24 Yu'an 1st Road, Shuofang Industrial Park, Xinwu District, Wuxi City